Italian foiling-boat project Zefiro has brought its proposed electric passenger craft into the METSTRADE 2026 conversation while making an unusually clear distinction between a completed design and a boat ready for service. The project appeared in the Foiling Technology Zone during the Amsterdam exhibition of 17–19 November, but its own website says the first hull has not yet been built and that the team is seeking an industrial partner to manufacture a prototype. For owners of 12- to 23.99-metre luxury yachts, the concept offers a fresh look at quiet ship-to-shore transport. It is a design to monitor, not a tender whose advertised performance has already been established by independent sea trials.
A tender concept with a defined size
Zefiro presents a fully electric, fully foiling, carbon-composite craft measuring 9.7 metres in length and 3.8 metres in beam at rest. Its proposed accommodation is eight passengers and a pilot, with open-deck or cabin configurations described by the company. That is a sizeable boat to carry as a tender, particularly on a luxury yacht close to the lower end of Luxury Yacht Guide's editorial range. Any potential host vessel would need a genuine analysis of tender weight, garage volume, davit or crane capacity and the vessel's own stability. The Zefiro dimensions also suggest possible independent uses as a resort transfer or water taxi. The design's relevance to yacht owners lies in the proposed guest experience, not an assumption that every 18-metre yacht could carry one.
Retractable foils distinguish the proposal
Most hydrofoil concepts attract attention while the hull is running above the water. Zefiro's distinctive argument concerns what happens when speed falls and the craft returns to a dock or shallow bay. The company describes foil geometry that retracts into the hull's profile, intended to limit the complications of exposed appendages during manoeuvring, storage and access to shallow areas. Its website refers to an Italian patent filing, UIBM number 102025000015892, for the mechanism. A patent filing is not evidence of a granted patent or a validated production design. Nevertheless, the retraction concept addresses an operational challenge that matters to yacht tenders: a craft must work efficiently at high speed and remain manageable when it is being recovered, boarded or manoeuvred close to other vessels.
Performance figures are targets, not trial results
Zefiro quotes foil-borne operation beginning at approximately 12 knots, a nominal cruising speed of 20 knots, a top speed of 28 knots and a range of about 70 nautical miles. The company also discusses substantial drag reduction when the hull is flying clear of the water. Those figures are best understood as project claims until a representative hull, propulsion package and load have undergone documented testing. Range in particular depends on weather, sea state, passenger numbers, battery condition and reserve requirements. An owner cannot translate a promotional distance into a safe passage plan without knowing the test assumptions. Engineering progress through a design phase is significant, but the eventual sea trials will need to confirm operating envelopes, not simply demonstrate that a prototype can rise onto its foils.
Quiet guest transfer is the intended advantage
The prospect of moving passengers between yacht and shore without combustion-engine noise is attractive in sheltered Mediterranean waters. Electric propulsion may also reduce local exhaust at the point of use, although the broader environmental result depends on the source of electricity and the manufacture and disposal of the battery system. Zefiro envisages calm island transfers, resorts and routes sensitive to wake and noise. There is an important operational qualification: foiling craft still create wakes during transition and low-speed manoeuvres, while local navigation rules can limit speed regardless of technology. No design can assume blanket permission to operate in protected waters. An owner or commercial operator would need to establish the applicable regulations, navigational hazards and practical charging infrastructure at both ends of the proposed route.
The 9.7-metre size presents real yacht constraints
The luxury-yacht tender role must be evaluated honestly. Nine places and an electric powertrain could suit guests aboard a larger vessel, but a 9.7-metre tender approaches the size of a substantial standalone boat. A typical 12- to 23.99-metre yacht has finite deck and machinery space, and a large tender can compete with essential safety equipment, fuel, stores and owner facilities. Some owners might use Zefiro as a shore-based companion craft rather than carry it permanently. Others would need a mothership specifically designed around the tender. Until the prototype's lightship mass, loaded displacement, lifting points, battery arrangement and sea-fastening requirements are published, compatibility cannot be claimed. The concept is exciting, but the constraints of carrying it are a central part of the story.
Battery capacity and charging will determine usefulness
Electric propulsion can be pleasant in daily operation, but the logistics are not solved by eliminating a fuel tank. A yacht owner considering regular transfers needs to know the usable battery capacity, charging rate, shore-power specification and time required to restore the chosen operating reserve. Battery thermal management, isolation, ventilation, monitoring and fire-safety design are equally important. There is also the question of where energy comes from if the tender is charged aboard the mothership. Shore supply, generators and renewable generation have different costs and emissions profiles. The Zefiro project's public technical overview does not yet supply a commissioned installation manual or witnessed endurance curve. Those documents should form part of any later procurement decision.
Flight control is a central engineering task
Hydrofoiling requires the boat to make continuous adjustments as speed, load and wave shape change. A passenger craft intended for routine service will need an appropriate flight-control architecture, robust sensors and practical behaviour when one component fails. The Zefiro team identifies flight control among the completed engineering design phases, but further validation remains to be done on a real hull. Sea trials must establish safe transitions from displacement to foil-borne operation and back again, including turns, following seas, sudden power reductions and unequal passenger loading. The ability to lower or retract appendages needs comparable scrutiny. Those questions are not criticisms of the concept; they are the normal path between promising naval architecture and dependable passenger-carrying equipment.
A multidisciplinary Italian design team
The company's published team includes industrial designer and architect Mario Bonelli, naval engineer Paolo Portinari and management engineer Francesco Fiorentini. Their biographies describe backgrounds in marine design, composite engineering and industrial technology. The combination makes sense for a vessel requiring close coordination between hull form, structure, mechanical retraction and electronic control. Yet the delivery of a certified product also depends on the selected builder, suppliers, test programme and aftersales organisation. That is precisely why the search for an industrial partner matters. Even an advanced design cannot establish a reliable service fleet until tooling, assembly methods, conformity assessment, trials and maintenance procedures have been resolved. The project's public invitation for manufacturing, licensing and investment is therefore a material element of the current news.
What METSTRADE contributes at this stage
Presenting Zefiro to an industry trade audience is different from announcing the sale of a finished boat. METSTRADE provides access to composite manufacturers, propulsion specialists, battery suppliers, control-system developers and potential production partners in a concentrated setting. A concept with retractable foils may need exactly that breadth of expertise. For observers, the exhibition appearance gives a dated development milestone and a way to verify that the project is being actively presented to the market. It does not indicate that orders have begun, that launch dates are fixed or that a buyer can take delivery. Any future statement about production should be checked against a builder announcement, a launched hull and completion of applicable certification and trials.
Potential relevance to resorts and shore operations
Some of the most credible early uses may lie where infrastructure is under the control of one operator. A resort could manage charging points and passenger schedules at both ends of a regular transfer, while a harbour or urban operator could study designated routes and local safety rules. Such settings provide more predictable conditions than a tender that must follow an owner across changing marinas and anchorages. A demonstration on a repeatable route could also generate usable operational data. Still, a controlled route is not automatically easy: dock heights, wave exposure, weather cancellations, staff training and rescue provisions remain fundamental. The business case would depend on uptime, actual operating costs and the number of trips available between charges.
The next milestone is a real hull
Zefiro's own website closes with a candid statement: design work has progressed through hull and hydrodynamics, foil mechanism, propulsion, flight control and interior planning, but an industrial partner is still needed to build the prototype. That disclosure makes it possible to treat the project fairly. The design deserves attention for its attempt to combine retractable foils, electric power and a passenger-focused layout. It does not yet justify claims of proven 70-nautical-mile service or a ready-to-order luxury-yacht tender. The most useful next news will be the identity of the manufacturing partner, followed by launch, independent trial evidence and clear delivery specifications. Until then, Zefiro is a serious proposal whose practical promise remains to be tested on the water.
Sources and image credits
Reporting based on Zefiro company-supplied 14 November 2026 METSTRADE announcement, Zefiro design team original specifications and current prototype status, METSTRADE official flyZefiro exhibitor listing.
Lead rendering: Zefiro 9.7-metre electric foiling tender design; official company rendering, not a launched or tested vessel. Official original Zefiro design rendering from the project company own website and press materials. The render illustrates an unbuilt concept, clearly identified as such. Not AI-created newsroom imagery. Original official image source.



